butt fusion machine

Georg Fischer BUTT FUSION MACHINE

Posted by rudyprmd in hdpe pipe, mesin butt fusion, MESIN LAS HDPE, MESIN PENYAMBUNG PIPA, pipa pe 100 on June 7, 2009

: Georg Fischer Butt Fusion Machine

Georg Fischer Butt Fusion Machine sangat terkenal tangguh untuk penyambungan (jointing) pipa HDPE (pipa PE). Banyak merk yang beredar di Indonesia, meskipun demikian Georg Fischer Butt Fusion Machine tetap yang terbaik berdasarkan pengalaman kami dalam menyambung pipa PE untuk jaringan air dan gas sejak 1999.

Tiga keunggulan utama mesin butt fusion Georg fischer adalah:

Hidrolik yang tangguh dan tidak pernah rusak (pengalaman 7 tahun pemakaian)
Heating plate yang kokoh dan memiliki panas yang stabil.
Scraper blade dengan ketajaman pisau yang tidak perlu diasah lagi

Untuk itu akan kami tampilkan keunggulan salah satu mesin butt fusion Georg Fischer yaitu KL-160.

KL 160 Butt fusion machines

KL 160 ECO1 Machine complete

Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
Size range d 40 – 160 mm, for complete pressure range up to PN 16.
Including transport packaging, without accessories and without reduction inserts
115 V on request!

Basic machine

Distortion-free machine base
Good accessibility thanks to 45° inclination
Hardened and hard chrome-plated guide shafts for extreme loads
Double clamping device for secure hold and exact radial and axial alignment of components
For the purpose of welding bends and T-pieces the 2. clamping element is fast and without loosing stability on the guiding shafts relocatable
Knurled handles for easy opening and closing of clamping brackets without additional tools
drip-proof quick action coupling for the connection of the hydraulic hoses

Planer

Powerful parallel planer for single or double-sided facing of pipe ends
Load transfer via maintenance-free, robust worm drive
Right-angled facing due to wide bedding, with side stop for single-sided facing
Optimised cutting geometry for even and chatter-free planing
Safety switch to prevent undesired start-up

Heating element

High performance, electronic controlled heating element
High temperature accuracy over the entire heating surface
High-quality, non-stick PTFE-coating with long service life
Additional thermometer for fast check of the fusion temperature

Remote control

Electronic temperature control
Accurate adjustment of heating element temperature

Hydraulic unit

Clearly visible, vibration-free pressure gauge with precision scaling
Compact construction with protection frame
Fine adjustment of pressure
High pressure constance during cooling phase
Fix attached hydraulic hose

Case

For safe storage of planer and heating element

KL 160 TOP1 Machine complete

Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
Size range d 40 – 160 mm, for complete pressure range up to PN 16.
The butt fusion machine could be assembled with the welding recorder WR 100.
Machine provided with cast-aluminium Hydromat hydraulic unit.
Control box containing electronic temperature control and power distribution for heating element and planer
Including transport packaging, without accessories and without reduction inserts
115 V on request!

KL 160 TOP2 Machine complete

Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
Size range d 40 – 160 mm, for complete pressure range up to PN 16.
The butt fusion machine could be assembled with the welding recorder WR 100.
Machine provided with cast-aluminium Hydromat hydraulic unit.
Electronic heating element control (Remote control)
Including transport packaging, without accessories and without reduction inserts
115 V on request!

KL 160 Accessories

Reduction clamping inserts, wide

d 40 – 140 mm
Each code number defines 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed.
We recommend 4 wide and 4 narrow half shells.

Reduction clamping inserts, narrow

d 40 – 140 mm
Each code number defines 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed.
We recommend 4 wide and 4 narrow half shells.

Reduction clamping inserts-set

4 wide and 4 narrow clamping inserts of each dimension

Flange adapter clamping unit

For correct clamping and fusion jointing of short end fittings

Upper narrow edge half clamp

For the clamping of elbows

Power control box

Electric box for safe connection of all electric components
Fitted with safety and protection devices
IP 55 casing
CEI-EN IP 44 electric connector
Includes temperature control of heating plate

1 Set planer blades

(1 set = 2 blades)

Untuk keterangan lebih lanjut, hubungi:

Rudy Permadi

PT. Warga Teknik Mekanika

Email:rudy_prmd@yahoo.com

http://id.88db.com/id/Members/Member_Info.page?mid=81333

http://wargatm.indonetwork.co.id/warga-tehnik-mekanika.htm

http://wargatm.blog.com/

http://rudy_prmd.hisupplier.com/

Phones: 062 0816 877 518, 021 710 76 744

Faxs: 062 21 849 98 927

Jatibening, Bekasi Selatan 17412,

Jawa Barat, Indonesia

Georg Fischer Butt Fusion Machine

butt fusion machine, pipa hdpe, pipa pe, polypipe fusion

2 Comments

HDPE Butt Fusion Machines

Posted by rudyprmd in hdpe pipe, mesin butt fusion, pipa pe 100 on June 7, 2009

warga tehnik mekanika

Warga Tehnik Mekanika siap mengerjakan konstruksi perpipaan HDPE untuk:
1. BIOGAS PIPELINE
2. PLTU pipeline
3. PIPA HDPE UNTUK PDAM
4. Hydrant atau fire fighting
5. Pipa hdpe untuk gedung bertingkat
6. Sewa mesin penyambung pipa HDPE
7. Perbaikan perpipaan

Persiapan Penyambungan pipa HDPE diameter 800mm

PT. WARGA TEHNIK MEKANIKA menyediakan:
a. PE fitting /hdpe pipe fitting
b. Polypipe / pipa PE / pipa HDPE /
c. Mesin Heat fusion / hdpe fusion / pipe fusion
d. Valve berbagai ukuran dan jenis
e. Elbow, tee, Flange, stub end
f. Compression fitting
g. PLASTIC WATER METER

Kontak: