-
-
KL 160 GF
-
-
KL 315 GF
-
-
PLANNER KL 160 GF
-
-
BASE MACHINE GF
-
-
HOT PLATE GF
-
-
PANEL CONTROL GF 160
-
-
HYDROLIC UNIT GF 160
-
-
BLADE UNTUK GF 160
-
-
KL 160 GF
-
-
Georg Fischer Butt Fusion Machine
-
-
GF 1000
 Georg Fischer Butt Fusion Machine sangat terkenal tangguh untuk penyambungan (jointing) pipa HDPE (pipa PE). Banyak merk yang beredar di Indonesia, meskipun demikian Georg Fischer Butt Fusion Machine tetap yang terbaik berdasarkan pengalaman kami dalam menyambung pipa PE untuk jaringan air dan gas sejak 1999.
Tiga keunggulan utama mesin butt fusion Georg fischer adalah:
- Hidrolik yang tangguh dan tidak pernah rusak (pengalaman 7 tahun pemakaian)
- Heating plate yang kokoh dan memiliki panas yang stabil.
- Scraper blade dengan ketajaman pisau yang tidak perlu diasah lagi
Untuk itu akan kami tampilkan keunggulan salah satu mesin butt fusion Georg Fischer yaitu KL-160.
Â
KL 160 Butt fusion machines
Â
KL 160 ECO1 Machine complete
- Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
- Size range d 40 – 160 mm, for complete pressure range up to PN 16.
- Including transport packaging, without accessories and without reduction inserts
- 115 V on request!
Basic machine
- Distortion-free machine base
- Good accessibility thanks to 45° inclination
- Hardened and hard chrome-plated guide shafts for extreme loads
- Double clamping device for secure hold and exact radial and axial alignment of components
- For the purpose of welding bends and T-pieces the 2. clamping element is fast and without loosing stability on the guiding shafts relocatable
- Knurled handles for easy opening and closing of clamping brackets without additional tools
- drip-proof quick action coupling for the connection of the hydraulic hoses
Planer
- Powerful parallel planer for single or double-sided facing of pipe ends
- Load transfer via maintenance-free, robust worm drive
- Right-angled facing due to wide bedding, with side stop for single-sided facing
- Optimised cutting geometry for even and chatter-free planing
- Safety switch to prevent undesired start-up
Heating element
- High performance, electronic controlled heating element
- High temperature accuracy over the entire heating surface
- High-quality, non-stick PTFE-coating with long service life
- Additional thermometer for fast check of the fusion temperature
Remote control
- Electronic temperature control
- Accurate adjustment of heating element temperature
Hydraulic unit
- Clearly visible, vibration-free pressure gauge with precision scaling
- Compact construction with protection frame
- Fine adjustment of pressure
- High pressure constance during cooling phase
- Fix attached hydraulic hose
 Case
- For safe storage of planer and heating element
KL 160 TOP1 Machine complete
- Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
- Size range d 40 – 160 mm, for complete pressure range up to PN 16.
- The butt fusion machine could be assembled with the welding recorder WR 100.
- Machine provided with cast-aluminium Hydromat hydraulic unit.
- Control box containing electronic temperature control and power distribution for heating element and planer
- Including transport packaging, without accessories and without reduction inserts
- 115 V on request!
KL 160 TOP2 Machine complete
- Compact and very lightweight heating element-butt fusion machine for fusion jointing PP, PE and PVDF pipes and fittings.
- Size range d 40 – 160 mm, for complete pressure range up to PN 16.
- The butt fusion machine could be assembled with the welding recorder WR 100.
- Machine provided with cast-aluminium Hydromat hydraulic unit.
- Electronic heating element control (Remote control)
- Including transport packaging, without accessories and without reduction inserts
- 115 V on request!
KL 160 Accessories
Â
Reduction clamping inserts, wide
- d 40 – 140 mm
- Each code number defines 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed.
- We recommend 4 wide and 4 narrow half shells.
Reduction clamping inserts, narrow
- d 40 – 140 mm
- Each code number defines 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed.
- We recommend 4 wide and 4 narrow half shells.
Reduction clamping inserts-set
- 4 wide and 4 narrow clamping inserts of each dimension
Flange adapter clamping unit
- For correct clamping and fusion jointing of short end fittings
Upper narrow edge half clamp
- For the clamping of elbows
Power control box
- Electric box for safe connection of all electric components
- Fitted with safety and protection devices
- IP 55 casing
- CEI-EN IP 44 electric connector
- Includes temperature control of heating plate
Â
1 Set planer blades
Â
Untuk keterangan lebih lanjut, hubungi:
PT. Warga Teknik Mekanika
http://id.88db.com/id/Members/Member_Info.page?mid=81333
http://wargatm.indonetwork.co.id/warga-tehnik-mekanika.htm
http://wargatm.blog.com/
1. JODI
jodi_prmd@yahoo.com
0812 826 114 66
BB pin: 7F AB 24 OE
2. OCCY
occy_lee@yahoo.com
0857 77 52 77 50
0812 1991 69 53
BB pin: 7D 7C E8 57
3. RUDY
rudy_prmd@yahoo.com
0816 877 518
0813 8189 7820
BB pin: 24 DEF 685
Â
Â
Â
Georg Fischer Butt Fusion Machine